Silentia Mounting Hardware | Brackets, Poles & Karts

Silentia Start

For convenient mounting directly to the wall. One Silentia Start is normally supplied with the screen. Additional wall mounting can be ordered separately.

Compatibility

Silentia’s wall mount comes in three heights and is compatible with Silentia Fold, Silentia Add, Silentia Semi, Silentia Fixed, and Silentia Shower.

Screw holes

Mark and drill the hole according to the appropriate drill-hole template for the selected Silentia Start height.

Silentia Start + Silentia spacer

20 mm /0.8"

Used to position a screen away from the wall, for example, to create space for a molding. Supplied in pairs.

100 mm /3.9" or 200 mm /7.9"

Used to position a screen away from the wall. Supplied in pairs.

Adjustable 200-500 mm /7.9''-1'8''

Used to position a screen further away from the wall. Supplied individually.

Silentia Start on medical rail

For mounting to a medical rail. Requires one Silentia Start together with two Silentia Clamps.

Compatibility

Silentia’s clamps combined with Silentia Start are compatible with Silentia Fold, Silentia Add, Silentia Semi and Silentia Fixed.

Important measurements

Height recommendations for various clamp combinations to support optimal installation performance.

Standard

This combination should be used when two wall tracks are mounted in a vertical line.

150 mm /5.9"

This combination should be used when space is required between a screen and a wall rail, e.g. in dialysis departments where panel access is vital.

150 mm + adjustable

This combination should be used when two wall rails sit at different distances from the wall.

Silentia Pole

The Silentia Pole is a free-standing mounting point available in five versions. The pole is screwed securely to the floor.

Compatibility

Silentia’s floor poles are compatible with Silentia Fold, Silentia Add, Silentia Semi and Silentia Fixed.

Installation

Place the pole in position and mark the drilling point under the plastic cover. Move the pole, drill, then return and check it is vertical before fastening.